00 BEDS HEALTHCARE FACILITY INCENERATOR TECHNICAL INFORMATIONS

1) Policy

– – Waste disposal administration will be taken special note to prevent health center infection.

– – Infections wastes shall be cared for, stored only and burned by a burner situated at hospital site.

2) Waste Disposal Plan

  1. a)Classification

– – Medical wastes in healthcare facility are categorized as follows;

Infections Waste Specially-controlled waste Organ, needle, etc.
Industrial waste Rubber gloves, etc.
General waste Gauze, etc.
General Waste Plastic, Rubber Infusion bottle, etc.
Paper, wood, Vinyl Voucher, etc.
Metal, Glass Can, Glass bottle
  1. b) Infections Waste Disposal

– – Partition: Infections garbage disposal will be set apart suitably and also packed in particular containers in addition to delivered to particular storage space.

– – Safety step: Infections waste will not be location in other containers on the means of partition, packing in addition to delivery.

– – Storage space: Infections waste will be kept in the storage space in gym website temporarily until infections waste is incinerated.

– – Incinerator:

It is developed to sanitize clinical waste, decrease its quantity, and make its parts unrecognizable all in one completely enclosed and automated system.

It combines directly heated steam, high stress and also shredding to take care of contagious materials.

The infected waste is stuffed into the top stainless-steel room where a sturdy shredder reduces the waste to miniature products. Utilizing gravity, the processed material comes under the therapy chamber where every product is heavy steam heated to 134 and also pressurized to 3 to bar for 20 mins. The operating conditions are continuously kept track of as well as validated to achieve complete sterilization.

The 60 mins typical duration process cycle is wholly automated. A computerized system monitors the process and instantly prints a record with the crucial disinfecting standards at the end of the cycle for exact record keeping. H or even more.

Therapy cycle:

1- Filling; the polluted waste is mechanically -filled into the room of the machine

2-Shredding; the durable shredder reduced the merchandise into small pieces and also includes a special turning around system to avoid jamming

3-Heat; saturated pressurized heavy steam increases the temperature to 134 C and the pressure to 3 bar

4-Sterilization; the sterilization enters straight call with the shredding material (134 c, 3 bar) for 20 mins

5-Cooling; temperature level is decreased to 80 C by spraying awesome water on Dual coat of the treatment vessel, simultaneously, the device returns to ambient pressure

6-Draining; the heavy steam is condensed to water and released with the cooling water into the sanitary sewer system

7-vacuum; the staying residual steam is vented out through an air pump

8-Unloading; a digital signal educates the operator which all safe operating conditions have been fulfilled

The problem unlocks the device and also permits gravity ditching of the cured waste into a container

Mentor Specification

General Characteristics

8log 10

Operational temp. max 160 C
Max Weight when filld with waste For a special hydraulic test. Kg 10500
Stress. Kg/ cm3 3.5
Steam Pressure. Bar 8
Max Steam Flow Kg/h 500
Compressed Air Bar 6
Electricity 380 V/3 – phase Surge Protection system 35KW
Operating Characteristics
Average Cycle Time. minutes 60
Process Wight Capacity . Kg 500 – 600
Density. Kg/m3 100
Average process wight capacity Kg./cycle microbial inactivation 200-300

8log 10

Waste volume reductin 80%
Consumption / Cycle
Steam. Kg 40
Electricity . KW/h 9
Water Liters 500