Small Medical Office Waste Incinerators

Product Description PLC( Programmable Logic Controller), Intelligent and Automated operation. Items/Model TS50(PLC) Picture   Burn Rate 50 kg/hour Feed Capacity 100kg Control Mode PLC Combustion Chamber 560L Internal Dimensions 100x80x70cm Secondary Chamber 280L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.7Kw Oil Consumption (kg/hour) 12.1–24 Gas Consumption (m3/hour) 9.9–26.1 Temperature Monitor Yes…

Read More

Medium Scale Solid Waste Incinerator

Double Combustion Chamber,Double Italy Burner,Smoke Filter Included,Burning Rate: 50-200kgs per hour optional,Primary Combustion Chamber: 1.57M3(1570Liters),Incinerator Mainbody steel: 8mm thickness,Paint for outside face: 800°C Rate,Chamber Material: High Alumina Fire Brick Wall, 1750℃ Rate,Idea for campsite average or below 600 people,Chimney: 10 Meters, Stainless steel… Items/Model TS150(PLC) Principle Waste Incineration Treatment Burn Rate Average 150 kg/hour *(50/100/200kgs/hour…

Read More

Small Light Weight Medical Incinerator 1500kgs per set

HICLOVER – Medical Environmental  Model YD-30 (Custom Edition) Picture   Burning Rate  average 30 kgs/hour Feed Capacity average 40 kgs Paimary Combustion Chamber 200 Liters Secondary Combustion Chamber 100 Liters Mix Combustion Chamber Yes Feed Mode Manual Voltage 220V Power 0.59Kw Fuel Type Diesel Oil Burner Italy Original Oil Consumption (Diesel Oil) average 13.3 kg/hour Gas Consumption…

Read More

Large Size Burning Rate:150-200 kg/hr Solid Waste Equipment Primary and Secondary Combustion Chamber Incinerator

Items/Model TS500(PLC) Picture Principle Waste Incineration Treatment Burn Rate 150-200 kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 2700L Internal Dimensions 190x120x120cm Secondary Chamber 1300L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Oil Consumption (kg/hour) Average 28 Gas Consumption (m3/hour) *** Temperature Monitor Digital Display Temperature Protection Yes Oil Tank 1400L Feed…

Read More

Likewise biomedical and harmful waste

is instilled and also full burning is reached. Solitary Chamber Excess Greater than an adequate amount of air (as high as 50% more than the amount On the surface supplied gas in addition to power are needed for the heaters along with forced air ventilation. A correctly running double- room controlled air system will definitely…

Read More

hiclover incinerator 100-150kgs per hour

Model YD-100 Picture Burning Rate 100-150 kgs/hour Key Combustion Chamber 2000 Liters Second Combustion Chamber 500 Liters Feed Setting Handbook Voltage 220V/380V Power 2.5 Kw Gas Kind Diesel Oil Heater Italy Original Oil Intake (Diesel Oil) Average 28 kg/hour Gas Utilization (Gas) *** Inner Dimensions 180x115x98 centimeters (primary chamber) External Dimensions 270x185x280cm (without chimney) Temperature…

Read More

Medical Waste Incinerator HICLOVER TS10 PLC 10kgs per hour

medical waste incinerator iraq price HICLOVER TS10 PLC 10kgs per hour Items/Model TS10(PLC) Picture   Burn Rate Average 10 kg/hour Feed Capacity Average 20kg/feeding Control Mode Programmable Logic Controller(PLC) Panel Combustion Chamber 100L Internal Dimensions 50x50x40cm Secondary Chamber 50L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.5Kw Oil Consumption (kg/hour) Typical 8.4kg/hour Gas…

Read More

Medical Waste Incineration Model TS20(PLC) Wet Scrubber (Water Spary tower)

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.vip.hiclover.com/  Email: [email protected]Email: [email protected]   Nanjing Clover Medical Technology Co.,Ltd. Items/Model TS20(PLC) Picture   Principle Medical Waste Incineration  Burn Rate Average 20 kg/hour Feed Capacity Average 40kg/feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 210L Internal Dimensions 65x65x50cm Secondary Chamber 110L Smoke Filter Wet Scrubber (Water Spary tower) Feed Mode Manual Voltage 380V Power 5Kw Oil Consumption (kg/hour) 7.8–16.3 Gas Consumption…

Read More

Pet Cremation Equipments

Basic Info. Model NO.:pet cremation incinerator cost Export Markets:Global Product Description A Model animal crematory burning rate from 20-400kgs per hour. Heavy duty combustion chamber and match for big animal cremation.  Secondary Chamber & Mix-Combustion Chamber. Residency time 2.0 sec. In post combustion chamber. Virtually smoke and odor free.  Smoke Filter Chamber with filter brick,…

Read More

Incinerators

Basic Info. Export Markets:Global Additional Info. Trademark:clover Product Description Nanjing Clover Medical Technology Co., Ltd.. Items/Model YD-10C YD-20C YD-30C YD-50C Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr. Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs Primary Chamber (Liters)…

Read More

incinerator smoke filter

All particles of this waste should achieve a high degree of sterilization instead of just “disinfection” because of the continuous agitations Description of the Treatment Cycle of the chip i) Loading * The waste has to be loaded by falling bagged and or boxed waste into the open loading door on the vessel. * The…

Read More

Farm Incinerator

Basic Info. Model NO.:farm animal equipment cremation creamatotium incin Export Markets:Global Product Description Key Features:  * All versions with Dual combustion chamber.  * Stainless Steel chimney/stack, long life. *according to sequence * High fever, long life of incinerator.  * Free or minimal installation on site.  * PLC Control Plane. *according to order  * New Design…

Read More

About Us HICLOVER

HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including…

Read More

High Temperature Incineration Process HICLOVER YD30

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.vip.hiclover.com/  Email: [email protected][email protected]   Nanjing Clover Medical Technology Co.,Ltd. Model YD-30  Burning Rate  average 30 kgs/hour Feed Capacity average 40 kgs Paimary Combustion Chamber 200 Liters Secondary Combustion Chamber 100 Liters Mix Combustion Chamber Yes Feed Mode Manual Voltage 220V Power 0.59Kw Fuel Type Diesel Oil Burner Italy Original Oil Consumption (Diesel Oil) average 13.3 kg/hour Gas Consumption (Natural Gas)…

Read More

Incinerator YD-100 for Iraq

 There are 03 sets Model YD-100 delivery to Iraq between year 2013 to 2014. The incinerator use for local several construction sites and all fuel type is diesel oil.   Items/Model YD-100 Burning Rate (kgs/Hour) 100 kgs/Hr. Feed Capacity (kgs) 200 kgs Equipment Weight 5300 kgs Primary Chamber (Liters) 1200 Secondary Chamber (Liters) 500 External…

Read More

waste disposal incinerator

2. What’s your minimum capacity and maximum capacity incinerator. 3. You do provide secodn hand incinerator in good working condition. Incinerator but the size of room > 2000 x >1200 mm. Prepare for burn LIQUID Waste +/- 20 liter/hr. C: How many batch can we place in each day basis per 24 hours. The chamber…

Read More

Model TS30 oil fired waste small incinerator 30kgs

Model TS30 oil fired waste small incinerator 30kgs/hr. Items/Model TS30(PLC) Picture   Burn Rate Average 20-30 kg/hour Feed Capacity Average 60kg per feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 330L Internal Dimensions 75x75x60cm Secondary Chamber 180L Smoke Filter Chamber Yes Feed Mode Manual Feeding Voltage 220V Power 0.5Kw Oil Consumption (kg/hour) Average 13.3…

Read More

Waste burner provider in china

Burning rate: 250 Kg/hr. It should be able to Operate not Less than 10 hours/day This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc… Design Specification: Types A, B, C, D, and E of medical waste “PYROLYTIC” combustion, by controlling the gasification of waste. The incinerator…

Read More

250kgs per hour capacity waste incinerator

Incinerator Model TS250 PLC, Overview This model is small-scale waste incineration equipment for small waste output. Construction  is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment.  Waste feed chamber is 1800Liters (1.8m3, TS250 PLC). Primary & Secondary combustion chambers and smoke filter chamber. Batch load on the bottom of chamber. Incinerator…

Read More

Medical Waste Incinerator for covid19 waste 100-150-300-500kgs per hour

Phone: +86-13813931455(whatsapp/wechat)Website: http://www.vip.hiclover.com/  Email: [email protected][email protected]   Nanjing Clover Medical Technology Co.,Ltd. ● Double Combustion Chambers All waste incinerator design with double combustion chamber. High Temperature, Smoke Treatment,No black smoke, Environmentally friendly.  ● Containerized Mobile Incinerators The incinerator mounted in ISO Container before leave factory, free-installation, no incineration house build construction,movable by truck.  ● Family Pets Dog&Cat Cremation Special design with movable platform,…

Read More

China incinerator

Incinerator Of Burning Capacity 30 kg/hr = 1 No The Incineration System Includes: I. Main Burner with A. Refractory lined Key and Additional Chamber. VI. Emergency position stack/ vent. VII. Cyclonic type droplet separator orgasm recirculation container in Mild steel ii. 1 No. Fully automated oil burner for additional chamber. III.Centrifugal forced draft combustion air…

Read More

small incinerators

The incinerator shall be equipped with water injection nozzle link. If the temperature in the primary chamber should rise too high (normal temperature between 300 and 800? C) during the working time, the automated water injection shall be actuated to decease the temperature.   The incinerator shall have the following features and facilities:-   a-   …

Read More

china medical burner

WASTE HEATERS SUGGESTIONS china clinical burner Capability ? Ordinary Daily Max/Min June Temperature Level Level, 21-39 ° C.? Ordinary Daily Max/Min January Temperature Level Level, 2-12 ° C. (adsbygoogle = window.adsbygoogle || []).push({}); Gas/ keys power operated,. ? Disposal of both non-hazardous in addition to infected products flows (per waste inventory). ? Incinerators must have…

Read More

Medical Waste Burner Capability Requirement 100kgs per hr

Temperature Level Show & & & & PLC Control Instance Main Burning Chamber Incinerator Text ***Primary Combustion Chamber Italy Oil/Gas Heating Unit ***Chimney:10.0Meters *** 2nd Burning Chamber *** Smoke Filter Chamber ***Italy oil/gas burner: 02 units ***Oil Tank (if oil fuel): 200Liters *** Heater PLC Control Circumstances Items/Model TS100( PLC) Principle Waste Incineration Therapy Melt Cost…

Read More

Incinerators for Medical Waste Disposal

Product Description TS model PLC incinerator is newest design for waste treatment, include medical waste, animal cremation and other solid waste. This gear quality structural for types of site, cremation incinerators, cremation manufacturer, cremation manufacturers, cremation of animals in malaysia, cremator burners, crematoriam incinerator, crematorium creature, like hospital, environmental department, animal cremation bureaus, etc.. CLOVER…

Read More

Regular 10kgs per hr burner for small Health Care facility

This equipment quality structural for kinds of site, like hospital, environmental department,  animal cremation agencies, etc.  HICLOVER Incinerator supply updated models with dual combustion chamber,  mix-combustion chamber and smoke filter  chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C. Devices Technical Specifications Model YD-10C Photo Feed Capacity Average 40 kgs…

Read More

incinerator of hospital pictures and drawings

HICLOVER is growing brand for environmental protection field, and market share with most of Africa, Middle East, Southeast Asia countries and part of North America, Europe territory. We are trusted partner for governmental organizations, non-profit organizations, international contractors, logistics organizations, military, pet cremation business owners, etc. We have export experience more than 40 countries, including war zone like…

Read More

Incinerator

Basic Info. for Animal:Incinerator Dosage Form:Incinerator Type:Incinerator Function:Incinerator Export Markets:Global Additional Info. Trademark:CLOVER MEDICAL Product Description Nanjing Clover Medical Technology Co., Ltd.. Items/Model YD-10C YD-20C YD-30C YD-50C Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr. Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs Equipment Weight 1200 kgs 1200 kgs…

Read More

MEDICAL WASTE INCINERATORS

Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Gal annealed) by Hot-Dip Process FM GLOBAL (FM) SECTION 11 82 21 Page 6 High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardened The incinerator will be of the controlled atmosphere kind, designed for (6-8) hour-day surgeries and rated at 75 mph. MEDICAL WASTE INCINERATORS…

Read More

incinerators manufacturers china

The incinerator will then take supply from the DO tank through its DO feed pumps to its respective burners. An incorporating meter shall be installed to measure the quantity of DO consumed by the incinerator. The meter will have a digital read out in litres and will record quantities from 1 to 99999 with an…

Read More

Waste Incineration Equipment

Basic Info. Export Markets:Global Additional Info. Trademark:CLOVER Origin:Pr China Production Capacity:1000 Sets Per Year Product Description 2. In year 2011, one Macau (China) place an order of incinerator, version SYC-30. This order under CIF business term and the carton ship via Hongkong port. Our shipping agent inform us there is a mishap at Hongkong when…

Read More

animal cremation

Pre-programmed PLC controlled Password activated and reversal history indication Motor starter with overload protection Automatic instantaneous stop on hard object in shredder bed Automatic heavy cutting load reversal and re-try , up to three times Control housing Nema type 12 Technical Characteristics of External SHREDDER Controls:   Chamber Dimensions(WxLxH): approx 33 c m x 38…

Read More

Needle Incinerator(Needle & Syringe Destroyers) and Micro Incinerator for COVID 19 waste

Needle Incinerator(Needle & Syringe Destroyers) and Micro Incinerator for COVID 19 waste. HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator Tel:  +86-25-8461 0201    Mobile: +86-13813931455(whatsapp/wechat)Website: http://www.vip.hiclover.com/  Email: [email protected]Email: [email protected]   Nanjing Clover Medical Technology Co.,Ltd.  

Read More

pet incinerator deisel

  The charging system shall include, as a minimum, a hopper for top feeding and mechanically operated hydraulic   charging pliers or augur. To prevent warpage or excessive thermal expansion, a charger cooling system using either   atmosphere or water shall be supplied.   Primary combustion chamber shall be either the rotary- or stationary fixed-hearth…

Read More

GENERAL SPECIFICATIONS FOR BURNERS

lnsulation: lnsulation to be utilized for stonework, increased concrete, or non-combustible product will protect against damages to the structure from intense warm and shall be of a depth to restrict the outside casing to an optimum temperature of 66 ° C in an ambient temperature of 21 ° C once the burner is running at…

Read More

Incinerator Medical Waste Process

Basic Info. Model NO.:infectious waste pyrolysis machine china Export Markets:Global Product Description Nanjing Clover Medical Technology Co., Ltd.  Nanjing Clover Medical Technology Co., Ltd.. Key Features:  * All versions with Dual combustion chamber. *according to order  * Stainless Steel chimney/stack, long lifetime. *according to order  * High fever, long lifetime of incinerator.  * Free or…

Read More

Large Incinerator 600 Kgs Per Hour

Product Description Nanjing Clover Medical Technology Co., Ltd.. Items/Model YD-200 YD-300 YD-500 YD-600 Burning Rate (kgs/Hour) 200 kgs/Hr. 300 kgs/Hr. 500 kgs/Hr. 600 kgs/Hr. Feed Capacity (kgs) 400 kgs 500 kgs 800 kgs 1100 kgs Equipment Weight 7600 kgs 8300 kgs 13000 kgs 16500 kgs Primary Chamber (Liters) 2000 2400 4000 5500 Secondary Chamber (Liters)…

Read More

incinerator for medical waste

incinerator for medical waste.Controlled air medical waste incinerator intended for incineration of bio-medical waste generated in a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, fabrics, papers, packs, etc.). a  diesel  fired  medical  waste …

Read More

medical incinerator producer

1. 9. Steel gas storage tank from black steel (capability less than 2500 litres) and will be installed at the incinerator Space. The container will be provided with all needed installations consisting of fill, vent, drain as well as overflow line, level sign and also access for evaluation and also maintenance. Degree switches over will…

Read More

New waste incinerator for Macau”

New waste incinerator for Macau. Items/Model TS50(PLC) Burn Rate 50 kg/hour Feed Capacity 100kg Control Mode PLC Combustion Chamber 560L Internal Dimensions 100x80x70cm Secondary Chamber 280L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Power 0.7Kw Oil Consumption (kg/hour) 12.1–24 Gas Consumption (m3/hour) 9.9–26.1 Temperature Monitor Yes Temperature Protection Yes Oil Tank 100L Feed…

Read More